Monday, 24 April 2017

OPERATION ON DSP PROCESSOR

    The aim of this experiment is to perform basic operations on DSP Processor. The operations were performed on a DSP Processor(TMS320F28335). The TI Code Composer Studio(CCS) was used for programming the DSP processor. The various operations carried out were Arithmetic Operations, Logical Operations and Shifting Operations.
    The same operations can also be performed using general purpose processor. But, DSP Processor is faster than general purpose processors.

Posted by at

8 comments:

  1. Unknown24 April 2017 at 09:33

    Good content

    ReplyDelete
  2. shrinish_00125 April 2017 at 05:51

    well written!!

    ReplyDelete
  3. Unknown25 April 2017 at 22:38

    Code Composer Studio (CCS ) was used to program the DSP.

    ReplyDelete
  4. Unknown25 April 2017 at 22:47

    complex arithmetic operation can be done easily on DSP processor

    ReplyDelete
  5. Unknown26 April 2017 at 12:09

    The basics of DSP were understood well through this experiment

    ReplyDelete
  6. Unknown28 April 2017 at 05:24

    Operations like convolution and correlation can also be done

    ReplyDelete
  7. Keshvi Srivastava28 April 2017 at 06:41

    These operations are executed within a single instruction cycle and millions of such instructions can be executed within seconds.That's what unique about DSP processors

    ReplyDelete
  8. Unknown28 April 2017 at 07:14

    DSP processor processes in a parallel fashion whereas general purpose processor acquires address sequentially.

    ReplyDelete

Subscribe to: Post Comments (Atom)